Zhermack silicone rubber ZA RTV 40-45
Zhermack
Product information "Zhermack silicone rubber ZA RTV 40-45"
Zhermack silicone rubber ZA RTV 40-45
Addition-curing 2-component silicone rubber (RTV) that vulcanizes at room temperature.
Features and Application:
- easy processing
- Easy mixing of the components 1:1 by weight
- very good flowability, mixture can be poured easily
- Crosslinking to form elastic, rubber-elastic vulcanizate without heat of reaction
- temporarily temperature resistant up to 150°C
- High tear resistance and high flexibility
- Very high level of detail in the reproduction
- excellent non-stick effect for easier release of the models
- Use with larger, self-supporting molds for all types of impressions
More product information:
Colour: blue (component A) and white (component B)
Mixture: 1:1 by weight
Specific Gravity: 1.1
Viscosity 5500 mPas
Mixing time at 23 degrees Celsius 1 minute
Processing time (pot life) at 23 degrees Celsius 50 minutes
Curing time at 23 degrees Celsius 240 minutes
Shore A hardness after 24 hours 40 ± 2
Breaking load 4 ± 0.2 N/mm²
Elongation at break 250 ± 20%
Tear strength 15 ± 1 N/mm²
Zhermack Silicone Rubber ZA RTV 40-45 is very suitable for the production of demanding, elastic and durable molds with large undercuts.
Zhermack silicone rubber ZA RTV 40-45 can be used to produce one-piece or multi-piece molds,
for molding original models made of wood, glass, metal, plastic, wax, ceramic casting compounds.
You can use all water-soluble casting materials such as relief casting compounds such as TFC Xyrarock or Zhermack Elite Rock, Keramin, TFC Alabaster plaster, modeling and model building plaster, cast stone, cement, concrete etc. in the molds already produced.
Also soap casting compounds (soap glycerin) for holding your own soap
or waxes for candle production are just as easily possible as casting with casting resin (resin).
You should pre-treat the mold with a release agent before pouring,
since casting resins can lead to embrittlement of the mold after repeated casting.
In general, the silicone ZA 2045 has a very long service life.
The silicone was not tested for skin and mucous membrane compatibility or use in connection with food.
If you are looking for silicones to use in relation to food or body shapes, ask us.
We also have the right materials for this in our range.
TOP quality, you will be amazed!
The silicone is brand new and can be stored for at least one year, NEW!
Mixing ratio: | 1:1 |
Product type: | silicone |
Colour: | blue |
specific weight: | 1.1 |
Curing time at 23 degrees Celsius: | 240 mins |
Viscosity: | 5500 mPas |
Shore hardness: | A40 |
Processing time at 23 degrees Celsius: | 50 mins |
tear strength: | 15N/mm2 |
Elongation at break (in %): | 250 |
breaking load: | 4N/mm2 |
We Also Recommend
Zhermack silicone rubber ZA 50 LT Shore hardness 50 medium hard blue
Zhermack silicone rubber HT 45 TRASPARENT Shore 43
Zhermack silicone rubber ZA 22 Mold Shore hardness 22 blue soft
Zhermack silicone rubber ZA 22 THIXO BODY Thixotropic skin spreadable
Zhermack premium silicone rubber Zax 60 hard blue duplicating silicone 10:1 content: 5.5kg (Base 500g + Catalyst 5kg)