Zhermack silicone rubber Platinum 95 ZETALABOR hard light blue kneading silicone 900 g
Zhermack
Zhermack silicone rubber Platinum 95 ZETALABOR hard light blue kneadable silicone kneadable 1:1 900g
Zhermack silicone PLATINUM 95 ZETALABOR kneadable silicone kneadable 1:1 900g
Content: 900g (450g A + 450g B)
High-precision A-Silicones for dental laboratories.
Application areas:
- Matrixes for the production of temporary restorations
- Repair of removable dentures
- Matrixes for making gingival masks
- Isolation of teeth when embedding in the cuvette
- Key for occlusal adjustment for positioning in the articulator
- Duplication of total dentures
- Support material for the processing of photopolymerizing composition resinsb
Dosage:
Take equal amounts of the two components from the containers and only use the appropriate measuring spoons! The measuring spoons must not be mixed up!
Mix the base and catalyst vigorously for about 30 seconds until a uniformly colored and streak-free mass is obtained. Then model the mass as needed. The working time including mixing is about 2 minutes.
The exact 1:1 mix ratio must be maintained to obtain the correct times and not to affect the final characteristics of the product.
Too high a dosage of the catalyst does not accelerate the setting time. Close the containers immediately after use, do not mix up the lids, under-lids and dosing spoons. The curing of addition-curing silicones can be impeded by wearing latex gloves. The surfaces that come into contact with the silicone must be acidic, free of grease and dry.
Storage:
24 months if stored correctly between 5° and 27°.
Technical specifications:
Colour: light blue
Mixing time: 30 sec.
Processing time : 2 min.
Setting time: 8 min.
shore hardness A (after 24 hours): 95
Heat resistance: 200°C
Linear dimensional change: 0.05%
The times given are calculated from the start of mixing at 23°C.
Mixing time at 23 degrees Celsius: | 1 min |
Mixing ratio: | 1:1 |
Dimension change in % after 24h: | 0.05 |
Colour: | Light Blue |
Processing time at 23 degrees Celsius: | 2 mins |
Shore hardness: | A95 |
Curing time at 23 degrees Celsius: | 8 mins |
We Also Recommend
Polyment silicone color I color paste for coloring silicone rubber I in 33 colors
Starter set mold making silicone rubber heat-resistant molds pewter HB small
REPLISIL silicone rubber 25 NF soft red Set of liquid duplicating silicone
Polyment silicone rubber type 1 I premium duplicating silicone soft
REPLISIL silicone rubber 35 LE medium hard food blue Set