REPLISIL silicone rubber 35 NO medium-hard food translucent Set
REPLISIL
REPLISIL silicone rubber 35 NO medium-hard food grade translucent Liquid duplicating silicone set
Product information "REPLISIL 35 NO food translucent SET"
REPLISIL 35 NO Food translucent SET
application
REPLISIL 35 NO is a pourable, addition-curing, 2-component silicone that vulcanizes at room temperature. For casting all common reproduction materials, especially when very accurate copies need to be made.
Suitable for all molds in the field of industry, mold making and hobbies.
BfR and FDA tested and therefore approved for contact with food.
For pouring out of baking molds, chocolate moulds, icing and much more.
Heat resistance up to 200°C (short term up to 270°C)
processing
Important! The platinum catalyst is in the A component. Only use components from the same batch. Mix both components thoroughly to ensure optimal homogeneity of the material.
Important processing instructions
Silicones are highly temperature sensitive. Please pay attention to the recommended temperature for storage and processing.
More product information:
Mixture: 1:1 by weight
viscosity 6000 mPas
Curing time at 23 degrees Celsius 60 minutes
hardness Shore A after 24 hours 35
tear strength 5.0 ± 1 N/mm²
elongation at break 450%
tear strength 14.0 N/mm²
Mixing ratio: | 1:1 |
Product type: | silicone |
Colour: | translucent |
Shore hardness: | A35 |
specific weight: | 1.05 |
Viscosity: | 6000 mPas |
Elongation at break (in %): | 450 |
tear strength: | 5.0N/mm2 |
Dimension change in % after 24h: | < 0.2 |
Curing time at 23 degrees Celsius: | 60 mins |
Mixing time at 23 degrees Celsius: | 10 mins |
We Also Recommend
REPLISIL 55 FB reddish brown SET
STENSIL ECO 30 Sand 10kg SET
REPLISIL STENSIL ECO 85 silicone rubber blue hard kneadable set
REPLISIL STENSIL ECO 60 silicone rubber orange hard kneadable set
REPLISIL STENSIL ECO 50 silicone rubber yellow medium-hard kneadable set