REPLISIL silicone rubber 25 NF soft red Set of liquid duplicating silicone

REPLISIL silicone rubber 25 NF soft red Set of liquid duplicating silicone

REPLISIL

  • €99,99
    Unit price€50,00 per kg
Tax included. Shipping calculated at checkout.

Only 19 left!

REPLISIL silicone rubber 25 NF soft red Set of liquid duplicating silicone

Product information "REPLISIL 25 NF Red SET"

REPLISIL 25 NF Red SET

application

REPLISIL 25 NF is an addition-curing 1:1 duplicating silicone with a final hardness of
Shore A 25, low viscosity with the best mechanical properties. It is used to produce negative molds that are extremely accurate in terms of dimensions and details.

processing

Mix REPLISIL components A and B at room temperature in a ratio of 1:1 for approx. 1 minute until you get a streak-free, uniform red colour, then pour it into the flask with the non-water plaster model at the same point until the model is completely covered. If the mass is mixed manually, stand briefly on the vibrator to remove any trapped air. After a hardening time of approx. 30 minutes at a room temperature of 23°C, the model can be removed from the mold, but should then remain in place for a short time (approx. 20 minutes) so that any impressions of undercuts can be reset.

Important processing instructions

Silicones are highly temperature sensitive. Please pay attention to the recommended temperature for storage and processing.


Technical specifications

Dosage: 1:1
Color of product: red
Mixing time: approx. 7 minutes
Setting time: approx. 25 minutes
Hardness: Shore A25
Density: 1.13 g/cm³
Viscosity: approx. 6,000 mPas
Linear dimensional change: < 0.2%
Tear strength (DIN 53 504 S 1): 4.0 N/mm²
Elongation at break (DIN 53 504 S 1): 480%
Tear resistance (ASTM D 624 B): 7.5 N/mm²

Shore hardness: A25
Mixing ratio: 1:1
Product type: silicone
Viscosity: 6000 mPas
Dimension change in % after 24h: < 0.2
Curing time at 23 degrees Celsius: 25 mins
Colour: red
specific weight: 1:13
Elongation at break (in %): 480
tear strength: 4.0N/mm2
Mixing time at 23 degrees Celsius: 7 mins


We Also Recommend

REPLISIL silicone rubber 32 N blue medium-hard Set of liquid duplicating silicone

REPLISIL silicone rubber 32 N blue medium-hard Set of liquid duplicating silicone

Regular price €94,90
Unit price€47,45 per kg
BTT-BA epoxy resin floor coating RAL outside tile paint concrete color screed color balcony color concrete slab color terrace color

BTT-BA epoxy resin floor coating RAL outside tile paint concrete color screed color balcony color concrete slab color terrace color

Regular price €69,90
Unit price€13,98 per kg
Polyment titanium dioxide I titanium white I oxide white I white pigments for coloring paints, plastics, concrete, screed, plaster, epoxy resin I

Polyment titanium dioxide I titanium white I oxide white I white pigments for coloring paints, plastics, concrete, screed, plaster, epoxy resin I

Regular price €20,90
Unit price€20,90 per 100g
REPLISIL Silicone Rubber 22 S Soft Pink Set Duplicating silicone liquid

REPLISIL Silicone Rubber 22 S Soft Pink Set Duplicating silicone liquid

Regular price €122,90
Unit price€61,45 per kg
Sycolina Farbwerke Latex Paint Colorful Emulsion Paint Hard-wearing

Sycolina Farbwerke Latex Paint Colorful Emulsion Paint Hard-wearing

Regular price €30,90
Unit price€18,45 per l