REPLISIL Silicone Rubber 22 S Soft Pink Set Duplicating silicone liquid

REPLISIL Silicone Rubber 22 S Soft Pink Set Duplicating silicone liquid

REPLISIL

  • €122,90
    Unit price€61,45 per kg
Tax included. Shipping calculated at checkout.

Only 10 left!

REPLISIL Silicone Rubber 22 S Soft Pink Set Duplicating silicone liquid

Product information "REPLISIL 22 S Pink SET"

REPLISIL 22 S Pink SET

application

REPLISIL 22 S is an addition-curing 1:1 duplicating silicone with a final hardness of Shore A22, low viscosity with the best mechanical properties. It is used to produce negative molds that are extremely accurate in terms of dimensions and details.

processing

Mix REPLISIL components A and B at room temperature in a ratio of 1:1 for approx. 1 minute until a streak-free, uniform pink color is obtained, then pour into the flask with the non-watered plaster model at the same point until the model is completely covered. If the mass is mixed manually, stand briefly on the vibrator to remove any trapped air. After a curing time of approx. 10 minutes
the model can be removed from the mold at a room temperature of 23°C, but should then remain in place for a short time (approx. 20 minutes) so that any impressions of undercuts can be reset.

Important processing instructions

Silicones are highly temperature sensitive. Please pay attention to the recommended temperature for storage and processing.

Technical specifications

Dosage: 1:1
Color of product: pink
Mixing time: approx. 3.5 minutes
Setting time : approx. 10 minutes
Hardness: Shore A22 Density: 1.05 g/cm³
Viscosity: approx. 2,500 mPas
Linear dimensional change: < 0.2%
Tear strength (DIN 53 504 S 1): 3.0 N/mm²
Elongation at break (DIN 53 504 S 1): 400%
Tear resistance (ASTM D 624 B): 5.0 N/mm²


Mixing ratio: 1:1
Product type: silicone
specific weight: 1.05
Dimension change in % after 24h: < 0.2
Shore hardness: A22
Elongation at break (in %): 400
Colour: pink
Viscosity: 2500 mPas
Mixing time at 23 degrees Celsius: 4 mins
Curing time at 23 degrees Celsius: 10 mins
tear strength: 3.0N/mm2


We Also Recommend

REPLISIL silicone rubber 25 NF soft red Set of liquid duplicating silicone

REPLISIL silicone rubber 25 NF soft red Set of liquid duplicating silicone

Regular price €99,99
Unit price€50,00 per kg
REPLISIL silicone rubber 32 N blue medium-hard Set of liquid duplicating silicone

REPLISIL silicone rubber 32 N blue medium-hard Set of liquid duplicating silicone

Regular price €94,90
Unit price€47,45 per kg
BTT-BA epoxy resin floor coating RAL outside tile paint concrete color screed color balcony color concrete slab color terrace color

BTT-BA epoxy resin floor coating RAL outside tile paint concrete color screed color balcony color concrete slab color terrace color

Regular price €69,90
Unit price€13,98 per kg
Polyment titanium dioxide I titanium white I oxide white I white pigments for coloring paints, plastics, concrete, screed, plaster, epoxy resin I

Polyment titanium dioxide I titanium white I oxide white I white pigments for coloring paints, plastics, concrete, screed, plaster, epoxy resin I

Regular price €20,90
Unit price€20,90 per 100g
Sycolina Farbwerke Latex Paint Colorful Emulsion Paint Hard-wearing

Sycolina Farbwerke Latex Paint Colorful Emulsion Paint Hard-wearing

Regular price €30,90
Unit price€18,45 per l