REPLISIL silicone rubber 22 N pink soft liquid Duplicating silicone set
REPLISIL
REPLISIL silicone rubber 22 N pink soft liquid Duplicating silicone set
REPLISIL 22 N Pink SET
application
REPLISIL 22 N is an addition-curing 1:1 duplicating silicone with a final hardness of Shore A 22, low viscosity with the best mechanical properties. It is used to produce negative molds that are extremely accurate in terms of dimensions and details.
processing
Mix REPLISIL components A and B at room temperature in a ratio of 1:1 for approx. 1 minute until a streak-free, uniform pink color is obtained, then pour into the flask with the non-watered plaster model at the same point until the model is completely covered. If the mass is mixed manually, stand briefly on the vibrator to remove any trapped air.
After a curing time of approx. 30 minutes at a room temperature of 23°C, the model can be removed from the mold, but should then remain in place for a short time (approx. 20 minutes) so that any impressions of undercuts can be reset.
Important processing instructions
Silicones are highly temperature sensitive. Please pay attention to the recommended temperature for storage and processing.
Technical specifications:
Dosage: 1:1
Color of product: pink
Mixing time: approx. 7 minutes
Setting time : approx. 25 minutes
Hardness: Shore A 22
Density: 1.05 g / cm³
Viscosity: approx. 2,500 mPas
Linear dimensional change: < 0.2%
Tear strength (DIN 53 504 S 1): 3.0 N/mm²
Elongation at break (DIN 53 504 S 1): 400%
Tear resistance (ASTM D 624 B): 5.0 N/mm²
Mixing ratio: | 1:1 |
Product type: | silicone |
specific weight: | 1.05 |
Dimension change in % after 24h: | < 0.2 |
Shore hardness: | A22 |
Curing time at 23 degrees Celsius: | 25 mins |
Elongation at break (in %): | 400 |
Colour: | pink |
Viscosity: | 2500 mPas |
tear strength: | 3.0N/mm2 |
Mixing time at 23 degrees Celsius: | 7 mins |
We Also Recommend
REPLISIL 55 FB reddish brown SET
STENSIL ECO 30 Sand 10kg SET
REPLISIL STENSIL ECO 85 silicone rubber blue hard kneadable set
REPLISIL STENSIL ECO 60 silicone rubber orange hard kneadable set
REPLISIL STENSIL ECO 50 silicone rubber yellow medium-hard kneadable set