REPLISIL 9 N silicone caoutchouc soft liquid blue set duplicating silicone
REPLISIL
REPLISIL 9 N silicone caoutchouc soft liquid blue set duplicating silicone
REPLISIL 9 N Blue SET
application
REPLISIL 9 N is an addition-curing 1:1 duplicating silicone with a final hardness of Shore A9, low viscosity with the best mechanical properties. It is used to produce negative molds that are extremely accurate in terms of dimensions and details.
processing
Mix REPLISIL components A and B at room temperature in a ratio of 1:1 for approx. 1 minute until a streak-free, uniform blue color is obtained, then pour into the flask with the non-watered plaster model at the same point until the model is completely covered. If the mass is mixed manually, stand briefly on the vibrator to remove any trapped air. After a curing time of approx. 30 minutes at a room temperature of 23°C, the model can be removed from the mold, but should then remain in place for a short time (approx. 20 minutes) so that any impressions of undercuts can be reset.
Important processing instructions
Silicones are highly temperature sensitive. Please pay attention to the recommended temperature for storage and processing.
Technical specifications
Dosage: 1:1
Color of product: blue
Mixing time: approx. 7 minutes
Setting time: approx. 25 minutes
Hardness: Shore A9
Density: 1.05 g/cm3
Viscosity: approx. 2,000 mPas
Linear dimensional change: < 0.2%
Tear strength (DIN 53 504 S 1): 1.5 N/mm²
Elongation at break (DIN 53 504 S 1): 257%
Tear resistance (ASTM D 624 B): 2.4 N/mm²
Mixing ratio: | 1:1 |
Product type: | silicone |
Colour: | blue |
specific weight: | 1.05 |
Dimension change in % after 24h: | < 0.2 |
Curing time at 23 degrees Celsius: | 25 mins |
tear strength: | 1.5N/mm2 |
Shore hardness: | A9 |
Viscosity: | 2000 mPas |
Mixing time at 23 degrees Celsius: | 7 mins |
Elongation at break (in %): | 257 |
We Also Recommend
REPLISIL silicone rubber 25 NF soft red Set of liquid duplicating silicone
REPLISIL silicone rubber 32 N blue medium-hard Set of liquid duplicating silicone
BTT-BA epoxy resin floor coating RAL outside tile paint concrete color screed color balcony color concrete slab color terrace color
Polyment titanium dioxide I titanium white I oxide white I white pigments for coloring paints, plastics, concrete, screed, plaster, epoxy resin I
REPLISIL Silicone Rubber 22 S Soft Pink Set Duplicating silicone liquid