Wagnersil S200 high-purity, low-viscosity silicone oil 500ml
Wagnersil
Wagnersil S200 high-purity silicone oil 500ml
Content: 500ml
WAGNERSILl S200 is a highly pure, water-clear, odorless and tasteless silicone oil. The silicone oil (fluid) is chemically and biologically highly inert, non-toxic, water-repellent and skin-friendly, has dielectric values and is heat and cold resistant from - 50 °C to + 200 °C.
The silicone oil is physiologically harmless and therefore ideally suited for lubricating machines in the food, luxury goods, animal feed and packaging industries, as well as in medical technology. As a lubricant, sealing and separating agent for valves, seals, ships, apparatus.
Furthermore, Wagnersil S200 silicone rubber/duplicating silicone can be stretched by up to 20%:
it becomes more fluid and softer after crosslinking, but the breaking strength decreases.
General application:
- release agent
- lubricants
- hydraulic oil
- anti-foaming agents
- hydrophobing agents
- liquid dielectric for electrical and
electronic equipment:
- Heat transfer oil
- Additive for care products
- Plastic additive
- Textile and fiber auxiliaries additive
A notice:
Silicone oil is not suitable as a release agent for the silicone casting because it would combine with the liquid silicone.
Processing:
Silicone oils of different viscosities can be mixed with one another in any way, so that any required viscosity can be set. As a non-polar liquid, WAGNERSIL S200 is not miscible with polar solvents such as water or short-chain alcohols. WAGNERSIL S200 is soluble in all proportions in aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, ethers, esters, ketones and higher alcohols. Before actual use with solvents, a test on a laboratory scale is recommended. When handling solvents, the corresponding hazard warnings must be observed.
Type of silicone oil:
- Polydimethylsiloxane
- low viscosity (viscosity 200 mPas)
- colorless
- Density 0.97 g/cm³
Mixing time at 23 degrees Celsius: | 1 min |
Mixing ratio: | 1:1 |
Dimension change in % after 24h: | 0.02 |
specific weight: | 1.05 |
Processing time at 23 degrees Celsius: | 30 min |
Curing time at 23 degrees Celsius: | 360 mins |
tear strength: | 5.0N/mm2 |
Elongation at break (in %): | 500 |
Viscosity: | 5000 mPas |
Colour: | colorless |
We Also Recommend
Wagnersil Premium 9 N blue Shore 9 EFZ 30 min 1:1
Wagnersil Premium 17 N blue Shore 17 EFZ 30 min 1:1
Wagnersil Premium 22 NF pink Shore 22 EFZ 30 min 1:1
Wagnersil Premium 21 NO translucent Shore 21 EFZ 30 min 1:1
Wagnersil Premium 32 N blue Shore 32 EFZ 30 min 1:1