Polyment mold release spray with wax for epoxy casting resin, polyester resin, PMMA and polyurethane | silicone-free | 400ml

• Mold release agent in spray form for epoxy casting resin, polyester resin, PMMA and polyurethane
• Release agent for spraying into a mold to facilitate demoulding
• Excellent separating effect - Free from CFC propellant gases - Wide range of applications - Easy to process
• NOT SUITABLE for separating silicone from silicone in multi-part silicone moulds
• use Polyment release petroleum jelly or Polyment release wax when making multi-part silicone molds

Processing:
The can should be shaken well before use. The release agent must be sprayed thinly and evenly onto the mold surface from a distance of 20 to 30 cm. If particularly even surfaces are required, the release film can be wiped off with a soft cloth.

Storage:
Protect from cold and heat.
Warm up cold goods to room temperature before use.
Shake up well.
Storage temperature: between 10°C and 30°C
Storage time: approx. 36 months (unopened original container)
Physico-chemical characteristics: Density at 20° C: 0.645 g/ml DIN 51757

Please check material compatibility before use!
The release agent is silicone-free!
Aerosol: active ingredients with propane/butane as propellant.